MVP Plus V Plow
- Available in powder-coated steel or high-density polyethylene.
- Available in 7½’, 8½’ and 9½’ widths.
- ULTRAFINISH enhances adhesion and corrosion resistance
- A steel cover and a formed cutting
edge over the center hinge prevents
snow from being lost over the top, as well to close
the gap in the center.
- The mounting structure is built on a high-strength tubular
T-Frame design that provides the optimum strength to the
entire blade assembly.
- The pitch adjustment feature lets you adjust the blade
pitch for more even cutting edge wear and longer cutting
edge life, a feature not found on many competitive V-plows.
Longer cutting edge life equals less money spent on replacement
edges and parts.
|
Western Subrbanite
- 21” tall and is available in widths of 6’8” or 7’4”.
- complies with Federal Standards and your vehicle manufacturers’
weight ratings.
- The simple attaching process can be done quickly and easily
by one person without tools.
- Hand-held control lets you raise, lower and angle the blade,
all from the comfort of your truck.
- Scrape lock feature hydraulically locks the blade
down for more efficient scraping action, helping to provide
a clean scrape to the surface
- Specially designed elastomer trip springs on the back of
the blade allow it to trip forward when an obstacle is encountered,
saving wear on your plow and vehicle.
|
Western HTS Series
- 14-gauge steel moldboard is 27” tall and 7½ feet wide.
- ULTRAFINISH enhances adhesion and corrosion resistance.
- 75 degree attack angle, cleaner scrape with every pass, 15
½” curl radius, maximum snow rolling efficiency
- UltraMount mounting system with one-side hookup
- State-of-the-art reflector optics, smooth wide beam pattern,
robust two-stud mounting, watertight adhesive-bonded housing,
long life halogen bulbs
|
Pro Plus Series
- Blade is a full 31½” tall and comes in 7½’, 8’, 8½’,
and 9’ widths.
- Industry-first, optimum-strength POWER BAR provides exceptional
torsional strength and rigidity to eliminate the blade twisting
that’s often seen in severe use.
- Optional blade wings attach quickly with a single pin.
Adding 6" to each side of the blade, increasing
overall blade width by 1'.
- High-strength steel base channel puts extra support where its needed
|
